Additional brake components

for Series Land Rovers


For ordering, please visit the On-Line Store

F.I. Brake Servos

These Brake Servo's (or Boosters) where also fitted to the Santana Land Rovers. They have a larger diameter, 8" instead of 6" (std Land Rover unit) membrane and therefore they can produce a larger force amplification. Unlike the larger LR brake servo's, found on the defender, these F.I. units will fit onto the same standard Series III pedal box and into the same pedal location. They will also take the standard Girling master cylinder. No changes to bulkhead, pedal-location or wing are necessary.
Used pedal boxes can be supplied.

For ordering, please visit the on-line store

Pedal box with F.I. Brake Servo and Girling (oem LR) master cylinder

F.I. Brake Servo diagraph

 

Pedal box with F.I. Brake Servo and Girling (LR 90) master cylinder

Early type brake servo/master cyl. fitted to our 109 demo vehicle

F.I. brake servo/master cyl. fitted to our 109" demo vehicle

F.I. Remote Brake Servo (ZI single line system)

This remote brake servo can be used on early SII as a simple effective solution for power brakes. There are several types available for 88" SWB up to SIIB Forward Control Land Rovers. With this system the original master cylinder can be retained to keep the vehicle original. No changes to bulkhead, pedal-location or wing are necessary.

For ordering, please visit the on-line store

F.I. Remote Brake Servo

F.I. Remote Servo Data sheet


1997 - 2007 Heystee Automotive bv