Technical dataOn HST Parabolic SpringsFor Series Land Rovers | ||||||||||||||||||||||
On the table below you can see which HST parabolic suspension kit is suited for your Land Rover.
|
||||||||||||||||||||||
HST Parabolic springs |
|||
Capacity (in Kg)Payload + vehicle weight |
Front axle | Rear axle | |
Load Level A (2 leaf front & 2 leaf rear) |
|||
| Normal load | 810 Kg | 735 Kg | |
| Maximum load | 955 Kg | 950 Kg | |
| Max. pay load | 145 Kg | 215 Kg | |
Load Level B (2 leaf front & 2+1 leaf rear) |
|||
| Normal load | 810 Kg | 755 Kg | |
| Maximum load | 955 Kg | 1.450 Kg | |
| Max. pay load | 145 Kg | 695 Kg | |
Load Level C (2 leaf front & 3+1 leaf rear) |
|||
| Normal load | 810 Kg | 945 Kg | |
| Maximum load | 955 Kg | 1.950 Kg | |
| Max. pay load | 145 Kg | 1.005 Kg | |
Load Level D (2 leaf front & 4 leaf rear) |
|||
| Normal load | 810 Kg | 1.060 Kg | |
| Maximum load | 955 Kg | 2.750 Kg | |
| Max. pay load | 145 Kg | 1.690 Kg | |
* Weights are based on our measuring and findings. Weights my differ on individual vehicles or other type than listed above |
How to measure vehicle heights:
|
Land Rover vehicle heights in Millimeter (Inches) |
Type |
Std LR | HST Parabolic springs |
| Front 88 SWB / 109 LWB | 116 (4.56") | 130 (5.11") |
| Rear 88 SWB - level B | 144 (5.66") | 165 (6.55") |
| Rear 109 LWB - level C *(1.000 Kg) |
159 (6.25") | 200 (7.87") |
| Rear 109 LWB -
level D *(1.120 Kg) |
129 (5.07") | 190 (7.48") |
| * Weight under axle (rear body weight) | ||
Land Rover vehicle weights* in Kilograms
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
